Skip to content Skip to sidebar Skip to footer
Home / Where Is Real Nav Data File Found Fsx

Where Is Real Nav Data File Found Fsx

Post a Comment

Alex' Projects ► Little Navmap - Frequently asked Questions

Little Navmap Dinky Navmap - Frequently asked Questions

See user manual for imprecise known problems:
► User Extremity - Known Problems.

See user manual for limitations and issues around Microsoft Flight Simulator 2020:
► Exploiter Manual - Known Problems - Microsoft Trainer 2020.

Read the joined chapter on a lower floor to minimize issues when loading flight plans into MSFS:
► User Manual - Microsoft Flight Simulator 2020 Airports and Navdata.

Translate below if you design to manipulation Little Navmap on a outside computer across a network to deflect common mistakes:
► User Extremity - Electronic network Setup.

Use your browser search function (usually Ctrl+F for Windows and Linux operating room ⌘+F for macOS) to find topics or keywords.

Troubleshooting

  1. How to fix issues

Facility

  1. How to update the program
  2. Where are the log and contour files?
  3. My opposing-virus or anti-malware complains near Little Navmap
  4. Why can I encounter only the X-Plane connect option
  5. I found an issue or have a proposal
  6. The platform crashes
  7. The program does not start and Windows shows an error message
  8. I'd like to completely polish of the platform and totally of its traces
  9. SSL Low-level formatting Error on Windows

General

  1. How can I create a flight plan
  2. The map is jumping close to randomly while flying
  3. How to backup userdata or the logbook
  4. Navaids or airways are red in the flight plan board
  5. Search result is empty
  6. I grow fuel flow indications that get into't play off Little Navmap's values
  7. Fuel planning and collection gives wrong fuel values
  8. I cannot see my aircraft
  9. The flight plan does non come out correctly in MSFS

Airports, scene subroutine library and navigation information

  1. I cannot see whatsoever airports or navaids
  2. I added an airport and it does not show up in Little Navmap
  3. Search for airport by country, state or urban center does not work out
  4. Airport runway numbers game don't match the runway numbers for procedures
  5. How to add procedures to airports?
  6. A MSFS appurtenance does not show up afterward reloading the scenery library in Little Navmap
  7. How can I update the navdata to the latest cycle
  8. I updated the navdata but it does non depict up
  9. I cannot see aprons and taxiways on the map
  10. I cannot choose a start position
  11. Some procedures operating theatre subprogram legs are marked coloured in the natural selection/search tree
  12. Navaids from the X-Plane user_nav.dat and the user_fix.DAT files practice not show up in Little Navmap

Interface and Windows

  1. How lavatory I make the map window bigger
  2. How can I score the map window larger
  3. I cannot resize a dock window

Correspondenc Display

  1. The represent moves jerky operating room I see stutters in Soft Navmap spell scrolling or zooming
  2. Lines disappearing
  3. I cannot remove a traffic pattern, a holding or measurement lines
  4. Map is fuzzy and not updating
  5. The map has a grayish or dark background when zooming in
  6. Why isn't the terrain mesh shown far North and South?
  7. Map screen backgroun is black
  8. Can I run the program on some other client computer crosswise the network
  9. Buttocks I run into the broadcast when running FSX, P3D, MSFS Oregon X-Airplane fullscreen
  10. The map window is non visible or shows only a white-haired surface

Apple macOS

  1. Where is the options menu item on macOS
  2. I cause a message complaining about an unidentified developer on macOS
  3. Cannot run Fiddling Navmap or Little Xpconnect on macOS Catalina

X-Plane and Little Xpconnect

  1. I installed Little Xpconnect but cannot find it in the X-Plane menus
  2. A pop up windowpane says my versions are not compatible Little Xpconnect needs to be updated
  3. Weather in X-Plane does not match what Little Navmap displays
  4. I get an error message about missing directories when loading X-Plane scenery
  5. Airports missing in X-Airplane scenery after reloading
  6. I lul see to it an older AIRAC cps in the Scene Libary menu for X-Airplane
  7. Little Xpconnect does non load in Ubuntu 18.04 or derived Linux distributions

Frequently asked Questions and Issues

Troubleshooting

How to fix issues

You can taste the following if you experience problems look-alike crashes, freezes, a corrupted window layout or other issues.

First update Little Navmap if you're non running the latest version.

Debased window layout or missing map windowpane

Try Window -> Reset Window layout to default or encumbrance a previously saved window layout lodge (picture Saving and Loading Layouts).

If this does not assistant, try the suggestions below.

Promptly and lancelike Solution

Go to the Little Navmap main menu Tools and superior Reset all Settings and re-start. Midget Navmap will show a head dialog so re-start after deleting every last settings.

If this does not help, you can restore the settings file backup which was mentioned in the dialog.

More complicated only thorough option

Give up Little Navmap and rename the main settings folder ABarthel which contains wholly simulator databases and is stored in the tailing places:

  • Windows: C:\Users\YOURUSERNAME\AppData\Roaming\ABarthel
  • Linux: /dwelling/YOURUSERNAME/.config/ABarthel
  • macOS: /Users/YOURUSERNAME/.config/ABarthel

Do not delete the folder, simply rename it to keep your settings if this does not fix the job.

Start Little Navmap and reckon if the release is departed.

If this did non help: Quit Little Navmap. Delete ABarthel which was just created freshly by the computer programme and rename your backup once again to ABarthel to convey your settings and databases back.

Story the problem

If nothing helps, report an matter either in the Support Forum at Avsim or send me an email through with Contact and Patronize.

▲

Installation

How to update the syllabu

You might either:

  • Delete the past version of Little Navmap and establis the untested one in the same place.
  • Install the new version in a new folder, e.g. by using the edition Eastern Samoa a directory identify suffix.

In either case do not meld the two old and new directories. Remains of previous versions power cause trouble.

Always update all related programs like Little Navconnect and Miniscule Xpconnect.

▲

Where are the log up and configuration files?

The files can cost opened in the default option copyreader from computer menu -> Tools -> Files and Directories -> Open Log Data file in Little Navmap.

For Windows these are:

Logarithm file: C:\Users\YOURUSERNAME\AppData\Local\Temp\abarthel-little_navmap.lumber

Configuration file: C:\Users\YOURUSERNAME\AppData\Roaming\ABarthel\little_navmap.ini

Details can exist found in the Files chapter in the manual.

▲

My anti-virus or anti-malware complains most Little Navmap

This is unremarkably a false positive.

I usually upload all Zip files to VirusTotal before making them public. This ensures that the files are checked by 50 or more anti-virus programs.

You can buoy send your downloaded files to VirusTotal and you will pay off the written report from my uploads immediately.

One false formal might go on and is none reason for concern.

▲

Why can I see only the X-Plane connect option

Little Navmap comes with a SimConnect library version 10.0.61259.0 (FSX SP2 / no Acceleration) and does non command a separate installation of SimConnect.

The included SimConnect library is compatible with all FSX and P3D versions as well as Microsoft Flight Simulator 2020.

The X-Aeroplane associate option is always shown. You probably installed Miniature Navmap on a computer that has no FSX, P3D Oregon MSFS installing. See User Manual - Network Setup if you intend to guide Small Navmap on a remote information processing system.

▲

I found an issue surgery have a proposal

All ideas and bugs are collected in the Github Issues for Pocketable Navmap.

Basic check if your idea surgery finding is already crustlike in that respect.

If not you can register at Github and write an result. Or els, you can place me an email and I put this on my internal inclination or create an issue for bigger tasks.

For errors send me a bug report in the Avsim Financial backing Meeting place or by e-mail. Figure How to report a Bug.

▲

The program crashes

Rename the settings directory which likewise contains the scenery databases. In Windows these can follow found in c:\Users\YOURUSERNAME\Appdata\Roaming\ABarthel. E.g. rename ABarthel to ABarthel.backup man.

If the problem persists send me a bug report in the Avsim Support Forum or by email. See How to report card a Bug.

▲

The program does not start and Windows shows an error message

Windows shows an error message cannot proceed because libmarblewidget-qt5.dll was not found or similar when trying to take off Wee Navmap.

This can make several reasons:

  • Not complete files were extracted and the mentioned DLL file is nonexistent. Check if it present in the same folder atomic number 3 the littlenamvmap.exe.
  • Anti-virus put the DLL into quarantine.
  • You start the program using a shortcut (.lnk file) and the workings directory is non the Little Navmap brochure (the one with the littlenamvmap.exe). The functional directory can be exchanged in the yoke properties in stimulant field Start In.

▲

I'd like to completely take the program and complete of its traces

All files and folders created by Shrimpy Navmap are described in the chapter Files in the manual.

Little Navmap does non create whatever registry entries connected Windows.

▲

SSL Initialization Error

This is caused by a lacking redistributable facility.

Install some vcredist_x64_2010.exe and vcredist_x86_2010.exe to pay back this issue.

▲

General

How can I produce a flight contrive

Zoom to an airport in the map and right dog on IT. Select Set ... as Flight Be after Departure. Search other airport on the correspondenc, just click and select Put off ... as Flight Plan Name and address.

That's it. You just built a simple flight plan.

Get a load at the Tutorials which are also linked in the help carte. These help to short-circuit in the program.

▲

The correspondenc is jumping around at random piece fast

The represent does not jump randomly. The level of surg changes to keep aircraft and the next flight plan waypoint centralized.

The default doings is to keep aircraft and adjacent flight architectural plan waypoint connected the screen once peerless flight plan leg is active (Battle of Magenta), i.e. you'ray flying. You backside move around the correspondenc manually but LNM jumps back to aircraft and waypoint after a patc. Entirely this is configurable in options connected page Simulator Aircraft.

You tail end also return to simple aircraft centering, for instance. The default values might follow confusing first merely they are like that to boil down the need for manual zooming.

If you switch to normal zooming you can change the level of rapid climb with the computer mouse wheel other other methods.

Please also scan the note about the special gestures in the linked manual chapter above.

▲

How to backup userdata or the logbook

One right smart to backup is export all into a CSV file out. This covers all used fields.

You can also relief the database directly. The userpoints and logbook entries are stored in a SQLite database. If interested you can look into this database using tools like this one: SQLitebrowser

The important database is C:\Users\YOURUSERNAME\AppData\Roaming\ABarthel\little_navmap_db\little_navmap_userdata.sqlite and little_navmap_logbook.sqlite respectively in Windows and $Location/.config/ABarthel/little_navmap_db/little_navmap_userdata.sqlite in macOS or Linux.

You have to close Little Navmap earlier creating a patronage or replacing the databases.

Little Navmap also creates three rolling backups (little_navmap_userdata.sqlite.1, etc.) on startup which you can usance if you deleted something accidentally.

▲

Navaids OR airways are red in the flight plan table

This can happen if you laden a flight project which was made using older navdata.

IT power check waypoints that were removed later surgery radio navaids that were decommissioned. These cannot exist found in later AIRAC cycles and therefore not in Little Navmap's database. These are shown in Bolshevik and are treated like user defined flight plan waypoints in Bantam Navmap.

Airways are displayed in Bolshevik if they do not exist or the stripped Oregon maximum air passage elevation restrictions are desecrated by the selected sail elevation when loading the flight plan.

See also User Manual - Flight Plan - Error Display.

▲

Search result is empty

Check the knock off down menu for the deepen indicator * and the search fields for whatever remaining text edition if the distance search does not give any or unheralded results. Employ Reset Hunting in the context carte of the result table operating room press Ctrl+R to clear totally search criteria.

Note that using an ICAO encrypt for searching will temporarily override all other options. This helps to exercise a quick search for an airdrome.

▲

I get fuel current indications that don't match Little Navmap's values

Fuel stream in the tab Performance of Little Navmap does non match to what the aircraft is showing.

An aircraft improver probably uses doctored values to workaround simulator limitations. This happens often with complex work level add-ons and might affect fuel calculation, planning and especially collection.

▲

Fire planning and collection gives wrongheaded fuel values

This is related to wrong fire indications of an appurtenance aircraft. Project preceding.

You rump still create an aircraft execution visibility manually and ignore the indications.

Set TAS and fuel flow for typical cruise level.

For fuel flow, TAS and vertical speed in the lineage and climb phases simply sire the values at low altitude, warm sail elevation and then participate the norm in Infinitesimal Navmap. Tune the profile manually As needed.

It might too follow beneficial to create distinguishable profiles for different sail altitude ranges, especially for large difficult aircraft.

▲

I cannot see my aircraft

Little Navmap does non connect automatically to a simulator per default option. You have to attend the main menu -> Tools -> Flying Simulator Connection.

See Drug user Manual - Connecting to a Flight Simulator.

▲

The flight plan does not show up correctly in MSFS

MSFS has many issues freight flight of steps plans. To boot the format is non documented yet which requires a lot of guesswork.

The following issues are known heretofore:

  • MSFS automatically adds transitions to draw near procedures also as SID and STAR if plan is of type IFR. Ever-changing these results in a completely new routing.
  • Saving a flat-footed plan between two airports of character IFR leave result in MSFS adding moderate waypoints and procedures like SID and STAR.
  • You cannot consumption airways or procedures for VFR flight plans. MSFS volition quietly remove these.
  • MSFS cannot load round trips where destination is equal to departure in more or less cases.
  • MSFS uses change state anticipation which May event in wrong flight programme video display in the Global Positioning System units or autopilot behavior. The Global Positioning System or autopilot will pick out a shortcut for hard turns which sometimes messes up a flight of stairs plan, for object lesson. Turn anticipation is a social occasion performed by FMS or RNAV devices to tell the pilot when to initiate a address the next waypoint on the programmed air lane to avoid overshooting the programmed course.
  • AL at waypoints and sometimes the sail altitude is ignored and replaced by MSFS' ain idea of a climb and descent visibility which has nix to do with the Little Navmap profile. This happens despite Little Navmap saving the altitude for from each one waypoint.
  • Fledge architectural plan names moldiness not contains extra characters like umlauts or accents. Little Navmap replaces these automatically when exporting a plan.

Unconnected from these issues preceding you might see to it MSFS crashes surgery corrupted flight plans when loading.

Also read the chapter Microsoft Fledge Simulator 2020 Airports and Navdata in the Little Navmap user manual to minimize issues with dissimilar navdata.

▲

Airports, scenery subroutine library and sailing data

I cannot see any airports or navaids

Load the scenery program library from the simulator. See Load Scenery Depository library Dialogue in the blue-collar.

▲

I added an drome and it does not show up in Little Navmap

You have to reload the scenery library. See Load Scenery Library Duologue. in the manual.

Imag topic below for limitations with MSFS.

▲

Information sources limit this functionality and it depends happening the selected navdata source in bill of fare Scene Library:

  • Navigraph only: This has only limited administrative airport information. Sole airport name (Frankfurt am Main), ICAO computer code (EDDF), ICAO region (ED) and area computer code (EUR) are useable.
  • All other modes: The completeness of administrative information depends on the airport. Administrative data (Department of State, City, etc.) is often missing for X-Plane airports. Country selective information is missing in MSFS.

▲

Airport runway numbers don't match the runway numbers for procedures

This depends on the scenery mode as kick in the menu Scenery Library -> Navigraph. The default is to use the flight simulator scenery for runways and ILS and the Navigraph database for every airspaces, airways and all other navaids.

Runways are named by the magnetic charge which changes over the years. This results in airports renaming their runways from time to time. Thence, mismatches between old airports, Be it gunstock or add-along, hindquarters happen.

IT's neither a Bantam Navmap nor Navigraph issue. Information technology is an unavoidable real world military issue where simulator scenery operating theater airports are not updated atomic number 3 imperviable as the real life airports.

See the Navdata chapter in the extremity for more info.

For FSX or Perpar3D you can use the Airport Design Editor to change the runway numbers.

Use Wedded to change an drome for X-Plane.

▲

How to add procedures to airports?

This is a very complex task.

For FSX operating room Perpar3D you can purpose the Airport Design Editor, add procedures to the airport then swap turned Navigraph in the scenery library menu. LNM will understand the procedures from your add-on airdrome and you can use them like the others.

X-Sheet: You can try to create a CIFP data file but this is very complex and not recommended as stated on the page present.

See Navdata in X-Plane 11 and XP-CIFP1101-Spec.pdf.

▲

A MSFS add-happening does non depict up after reloading the scenery library in Little Navmap

Encrypted add-on airports in MSFS cannot be scan by Little Navmap. The accessory is locked down with a DRM scheme if you find a file BGL.fsarchive in the add-on folders

Note that Little Navmap reads only add-happening scenery which has "content_type": "Center" or "content_type": "SCENERY" placed in the file patent.json of the add-on. Some tote up-on developers withal habit wrong values like "UNKNOWN" which will causa Little Navmap to ignore the scenery. You can change the manifest.json manually in a school tex editor and supplant the wrong "UNKNOWN" with "SCENERY".

Assure also User Extremity - Know Issues.

▲

How can buoy I update the navdata to the latest cycle

You cause to get a Navigraph subscription. This allows you to update the Little Navmap navdata to the latest.

I recommend to keep open Little Navmap, the simulator and all tools along the indistinguishable AIRAC cycle to avoid issues when load flight plans.

▲

I updated the navdata but information technology does not show up

You should use the automatic scan in the FMS Data Coach which usually finds the letter-perfect way.

See Miniature Navmap - Install Navigraph Updates to see how to set the path correctly if the machine rifle scan did not find the path.

▲

I cannot see aprons and taxiways connected the map

There are only white bars with a black outline showing the runways.

You probably selected Use Navigraph for all Features in the Scenery Library menu. Enjoyment Navigraph for Navaids and Procedures is the recommended mode which will show careful stock or add-on airports integrated with Navigraph navaids.

Learn Navigation Databases in the manual.

▲

I cannot choose a bug out position

You mightiness usance the wrong scenery mode Use Navigraph for completely Features. Watch Navigation Databases and Microsoft Flight Simulator 2020 Airports and Navdata for more information roughly this.

Select either Use Navigraph for Navaids and Procedures Beaver State Do not use Navigraph Database depending on information in above links (Navigraph MSFS update installed operating theater not).

▲

Some procedures surgery procedure legs are marked red in the selection/hunting tree

This can happen if navdata read from the simulator has errors or is incomplete. Note that this issue appears solely when using Serve non use Navigraph Database in the menu Scene Depository library.

The procedures cannot be used at all surgery only after confirming a warning dialogue.

A currently proverbial problem is missing recommended fix information for constant wheel spoke arc process legs in MSFS navdata.

See also Look Procedures and Procedures for more information.

▲

Navaids from the X-Skim user_nav.dat and the user_fix.DAT files do non evince up in Slight Navmap

LNM reads both the the user_nav.dat and the user_fix.DAT files. The trouble is that the navaids are hidden past Navigraph data per default. Consequently, you take up to switch to Do not habit Navigraph database in the menu Scenery Program library to see the user navaids.

You also have to reload the LNM scenery library afterwards adding or changing the user files.

The user navaids bathroom be used in the X-Plane shopworn FMS and GPS. But keep in mind that the user navaids DO non show up on the X-Even intrinsic map.

▲

User Interface and Windows

How can I make the map windowpane big

thither are several options:

  • Close the lookup windowpane and/operating room close search options in airdrome research (ternion lines or "hamburger" button). These take a lot of space.
  • Undock the search window, i.e. move out it from them principal windowpane and/or impending it. Normally non needed while flying anyway. I ingest it merely unresolved for flight planning.
  • Undock the mapping and run it to other CRT screen if available.
  • Occupy the search window and drop information technology along the progress window. This will produce a windowpane with search and progress tabs at the bottom.

Present are some tips for undocking (Ctrl-cardinal, etc.) and moving around in the interface: Substance abuser Interface - Dock Windows

▲

How can I make the mapping window bigger

The publish is similar to the one preceding.

It's usually the search window which keeps the map from expanding. Disenable all unneeded hunt options in the "hamburger" drop down menu on the tipto right in the airport hunt. Do the like for navaid search.

Additionally undock the explore windowpane and let IT blow. Since the search is usually only needed for flight of steps preparation you can close the search docking facility window when quick (Alt-1). You arse ever outdoors it quickly away hitting F4.

▲

I cannot resize a dock window

Freezing dock windows. Sample one of the following:

  1. Main menu -> Windowpane -> Reset Windowpane layout
  2. Dual flick on a window title to undock IT, i.e. bring it into floating state. Double click over again to put it back. Resizing should be allowed now.

Some other conclude can be the search window taking up to a fault much space:

  1. Switch around in the search tabs or undock and dock one back by double clicking into the title bar.
  2. Undock the search window and have it float. This bobtail windowpane is very communicatory and squeezes else docks into the corners even when search options are disabled.

▲

Map Display

The map moves jerky surgery I see stutters in Teensy-weensy Navmap while scrolling or zooming

You power undergo elite too many details. Go to main menu -> View -> Inside information -> Nonpayment Detail.

▲

Lines disappearance

Parts of the trajectory plan vanish.

This is a noted fault and can happen at foreordained zoom distances with long flight plan legs.

▲

I cannot murder a approach pattern, a property operating theatre measurement lines

You experience to suited-click on the hot spot.

See User Manual - Click Hotspots.

▲

Map is fuzzy and not updating

This can have respective reasons:

  1. The server for the online map is Down. These are free services where I have no influence on availability. Delay a few hours and they are normally backward.
  2. You are victimisation offline mode. This shows a red Offline warning message in Little Navmap's status bar. Disenable offline mode in the file menu. See Work Offline.
  3. Your net connection is broken or your firewall forbids network access for Little Navmap.

▲

The mapping has a grayish or nighttime background when zooming in

You use an online mapping and have hillshading enabled where IT has no coverage. Disable hillshading (Show Hillshading) or use another theme.

▲

Why isn't the terrain mesh shown far Northeastern and South?

I installed the Global mesh for LNM, but still nothing farther North and South?

The GLOBAL elevation information is only for the EL profile and altitude display in the status bar. Hillshading comes from an open host and that has known limitations and bugs. Coverage is modest. You terminate use another map theme which includes worldwide hillshading like the StamenTerrain or OpenTopoMap.

▲

Map background is black

Something went wrong when installing Little Navmap. Most potential the directory data is wanting.

▲

Apple macOS

Tin can I run the program on other client computer across the network

Yes. You tail end even ruffle varied systems like using macOS for Little Navmap and Windows for flying. The node computing device does not need a SimConnect or simulator installing at all.

Ensure User Hand-operated - Network Setup in the hand-operated.

▲

Can I see the program when running play FSX, P3D, MSFS or X-Plane fullscreen

You can not. But you can:

  1. Use an old second monitor for the map before throwing information technology departed.
  2. Take an old and slow notebook and use it in networked mode. Little Navmap is willing with 2 GB of ram and there are options to speed up map display. This notebook can run Linux Oregon macOS. Have got a look after at the blue-collar here: How to run a network Setup
  3. Run the simulator in seamless window mode. And so you tooshie Alt+Tab between applications.

▲

The map window is not visible operating room shows only a gray surface

This can happen for various reasons (the likes of a crash) or if you change the option Allow to undock the map window in the options dialog.

Usance menu Window -> Reset Window Layout in the main fare to clean up the windowpane layout.

▲

Where is the options fare item on macOS

Options sack be accessed in the application computer menu Diminutive Navmap -> Preferences.

▲

I get a content protesting about an unnamed developer on macOS

First strike the extracted archive out of the brochure Downloads. Then right click or Ctrl+Click happening the application and select Open. Confirm the dialog to run the program.

You probably have to enter an administrator name and word in one case. The program can be started ordinarily after this subprogram.

See Drug user Manual - Installation - macOS.

▲

Cannot run Little Navmap operating room Weensy Xpconnect on macOS Catalina

A new security measur feature in macOS forbids the execution of unsigned libraries or apps.

See Drug user Manual - Installation - macOS.

▲

X-Planing machine and Little Xpconnect

Little Xpconnect does not create any menus items in X-Plane. Installation was successful if you potty find Little Xpconnect in the plugin information of the X-Plane plugin manager.

▲

A pop up window says my versions are not compatible Little Xpconnect needs to be updated

Pop up window says my versions are not compatible and I need to upgrade Little Xpconnect contempt having the latest Little Xpconnect installed.

There is probably an old version of Bantam Xpconnect installed wrong somewhere in your X-Plane plugins course. Maybe IT was installed accidentally in the plugins base path without the Little Xpconnect booklet structure.

Check if in that location is a some other pamphlet with the Little Xpconnect executable (bring home the bacon.xpl, macintosh.xpl or lin.xpl depending on operative organisation) around operating room if the file is stored in the plugins folder on the top level.

You can see the path of the (wrongly) loaded plugin in the X-Woodworking plane plugin manager.

▲

Weather in X-Airplane does not match what Miniscule Navmap displays

The X-Skim upwind interface is very limited.

Little Navmap give notice only read the X-Plane windward file METAR.rwx and display only the nearest weather report for an airport in some cases.

There is no information available how and if X-Plane interpolates weather between Stations. Therefore, nearest weather and even station weather might not tally.

▲

I get an error message nearly missing directories when freight X-Plane scene

You have Read inactive Scene Entries: disabled in the scenery load dialog and X-Plane's scenery_packs.ini contains flyblown entries. Fix this by restarting X-Plane which will remove the old entries.

You might as well enable Read dead Scene Entries: which will cause Little Navmap to disregard scenery_packs.ini and read entirely. Get a line Load Scene Program library Dialog.

▲

Airports lost in X-Plane scenery after reloading

If you have Read inactive Scenery Entries: enabled: Re-start X-Carpenter's plane so that it can update the scenery_packs.ini.

See Load Scene Program library Dialog.

▲

I still see an older AIRAC cycle in the Scene Libary card for X-Plane

You have to reload the scenery library in Wee Navmap after updating the navdata in the simulator. Weeny Navmap will show the correct cycle and navdata after reloading.

▲

Little Xpconnect does not loading in Ubuntu 18.04 or copied Linux distributions

The job is caused aside a missing subroutine library. You can set u this manually.

libicu55 was supported until Ubuntu 16.04 Xenial, but it is compatible with 18.04 Bionic likewise.

Add the following repository and install the package

            sudo tote up-apt-secretary "debutante http://security.ubuntu.com/ubuntu xenial-security measures chief" sudo apt-get update sudo apt-puzzle install libicu55

Thanks to Wolfgang for the bakshis!

▲

Where Is Real Nav Data File Found Fsx

Source: https://albar965.github.io/littlenavmap-faq.html

Post a Comment for "Where Is Real Nav Data File Found Fsx"